Xamarin and Forms Deprecation Notice
Starting with version 8.0 we are no longer upgrading Xamarin and Forms solutions for the Data Capture SDK. Microsoft ended support for these frameworks on May 1, 2024, which locks them into discontinued tooling.
You may continue to use the latest releases of SDK version 7.x as per our support policy.
We recommend migrating to .NET MAUI to take advantage of the latest features and improvements in our SDK.
7.6.14
Released: May 8, 2026
No updates for this framework in this release.
7.6.13
Released: April 27, 2026
Bug Fixes
Smart Label Capture
- Fixed a memory leak in LabelCapture.
7.6.12
Released: April 21, 2026
Bug Fixes
Core
- Fixed a crash that occurred when the
DataCaptureContextsingleton was initialized more than once.
7.6.11
Released: April 16, 2026
Bug Fixes
Barcode
- Fixed a crash that could occur when scanning barcodes with the k-out-of-n filter enabled, if some detected barcodes were not subject to filtering.
Core
- Fixed a rare issue that was causing a crash when the app moved to the background
7.6.10
Released: April 2, 2026
No updates for this framework in this release.
7.6.9
Released: March 17, 2026
Bug Fixes
Core
- Fixed a potential app hang when the app transitions to the background for licenses without analytics enabled
- Fixed a potential deadlock on iOS when reading the camera torch state from the main thread while the camera was starting up
7.6.8
Released: March 6, 2026
Bug Fixes
Barcode
- Fixed a stability issue that could cause a crash when tracked barcodes were removed or expired during a scanning session
7.6.7
Released: February 2, 2026
Performance Improvements
Core
- Reduced intermittent memory spikes while configuring the barcode scanner across all capture modes
7.6.6
Released: January 23, 2026
No updates for this framework in this release.
7.6.5
Released: November 12, 2025
Bug Fixes
Core
- Fixed a memory leak and removed unnecessary retention of scanning data in some MatrixScan modes
7.6.4
Released: November 5, 2025
No updates for this framework in this release.
7.6.3
Released: October 29, 2025
No updates for this framework in this release.
7.6.2
Released: October 20, 2025
No updates for this framework in this release.
7.6.1
Released: September 18, 2025
Bug Fixes
Core
- Fixed decoding of some ASCII-encoded DataMatrix codes ending with '254' codeword followed by padding.
- Improved support for missing or damaged timing patterns in Aztec codes.
Barcode
- Fixed a crash that occurred when scanning barcodes encoded with non-UTF-8 data.
7.6.0
Released: September 15, 2025
New Features
ID
- A proprietary Transaction ID can now be attached to each ID scan to enable end-to-end traceability of user transactions.
- Better UX when scanning Mobile Driver Licenses (mDL) with new screens to handle Bluetooth device state and data transmission progress.
- Added support for the following documents:
- Canadian IDs and Driver Licenses for Newfoundland And Labrador, Northwest Territories, Prince Edward island and Yukon
- UK Military iD (MOD 90 ID Card)
- New US Driver License versions in Alaska and New Hampshire
- Georgia Medical Marijuana Card
Parser
- The GS1 parser now allows for dates in format
YYYYMMalso in non-strict mode if the year starts with20XX.
Bug Fixes
ID
- ID scanning results for
genderof documents that do not specify a gender are now correctly mapped asunspecified.
Behavioral Changes
- The MRZ fields
optionalandoptional1have been renamed toOptionalDataInLine1andOptionalDataInLine2, respectively.
Deprecations
ID
- Deprecated
resultShouldContainImage. - Deprecated
AamvaBarcodeVerification. - Deprecated
IdCaptureSettings.decodeIsoMobileDriverLicensesandIdCaptureSettings.decodeMobileDriverLicenseViz.
7.5.2
Released: December 4, 2025
Bug Fixes
Barcode
- Fixed a rare out-of-bound memory access crash when scanning low-resolution or blurry
EAN13/UPCAcodes at a specific distance - Fixed a crash that occurred when scanning barcodes encoded with non-UTF-8 data.
- Fixed a memory leak and removed unnecessary retention of scanning data in some MatrixScan modes
7.5.1
Released: September 4, 2025
No updates for this framework in this release.
7.5.0
Released: August 12, 2025
New Features
Barcode
- SparkScan now supports Smart Scan Selection. Scanning a single barcode is often difficult in environments where multiple barcodes are placed closely together, like on a densely packed warehouse shelf or on a package with various labels. This can lead to scanning the wrong item, causing errors and slowing down operations. Users might have to manually switch to a special, more precise scanning mode (Target Mode), which is inefficient. Smart Scan Selection solves this problem by automatically detecting when a user is trying to scan in a "dense barcode" environment. The interface then intelligently adapts, providing an aimer to help the user precisely select the desired barcode without needing to manually change any settings. This creates a seamless and more intuitive scanning experience.
- Improved support for non-standard GS1 AI codes.
- The
Barcodeclass now exposes a module count.
ID
- Scanning of ISO-18013 compliant mobile driver licenses is now supported in select justifications (Queensland Digital License).
Bug Fixes
ID
- Fixed bug in
AAMVABarcodeVerifierthat triggered error callbacks for each verification after updating from some older SDK version.
Behavioral Changes
- Sample applications now use
httpsto access the DataCapture SPM repository instead ofssh.
Deprecations
- Deprecated
BarcodeCaptureOverlayStyle.
7.4.4
Released: November 22, 2025
Bug Fixes
Core
- Fixed a rare crash in the EAN/UPC reader.
- Fixed a memory leak and removed unnecessary retention of scanning data in some MatrixScan modes
7.4.3
Released: August 29, 2025
No updates for this framework in this release.
7.4.2
Released: August 15, 2025
No updates for this framework in this release.
7.4.1
Released: July 14, 2025
No updates for this framework in this release.
7.4.0
Released: June 19, 2025
New Features
Barcode
- Add the possibility via
BarcodeCountCaptureList.SetBarcodeDataTransformerto set a barcode data transformer. The transformer will be applied to transform the barcode data before matching to the target barcodes.
ID
- Added support for Spanish residence permit "Green NIE".
- Added support for US Medical Marijuana IDs from West Virginia, Florida, Pennsylvania, Nevada, New York, and Oklahoma.
Performance Improvements
- Updated ARM MbedTLS from 3.6.2 to 3.6.3.
ID
- Improved AAMVA Barcode Verification accuracy for Missouri documents.
Bug Fixes
ID
- Fixed an issue where the middle name read from an AAMVA-compliant barcode would be at times returned as
NONE.
7.3.3
Released: July 25, 2025
Bug Fixes
ID
- Fixed an issue where preexisting OTA models on the device, if any, would be loaded instead of the latest model for the SDK version, leading to errors.
7.3.4
Released: February 24, 2026
Bug Fixes
Barcode
- Fixed a crash that could occur in Barcode Pick when the BarcodePickView is deallocated but the guidance on screen was being updated
Smart Label Capture
- Fixed Swift naming for SDCLabelDateResult - now correctly exposed as LabelDateResult. Resolves naming conflict that could cause undefined behavior
Core
- Fixed a crash when toggling the zoom switch without setting a frame source
- Fixed a bug that could in rare cases produce a black screen when starting the camera
- Fixed a memory leak and removed unnecessary retention of scanning data in some MatrixScan modes
7.3.2
Released: June 25, 2025
No updates for this framework in this release.
7.3.1
Released: June 13, 2025
No updates for this framework in this release.
7.3.0
Released: May 16, 2025
New Features
Barcode
- Added support for structured append QR codes in all MatrixScan modes. They are exposed over
ScObjectCountingSessionand rendered as a group. The API is identical to how structured append is used in a single barcode use case: the entire structured append data is accessible on all sub code results.
ID
- Unify the result value when parsing the sex field, including added support for special characters used, so that it is always one of the values
female,maleorunspecified
Bug Fixes
Barcode
- Fixed an issue in SparkScan where the mini preview was closed after a scan, even if the preview behavior was set to
Persistent.
Behavioral Changes
- MatrixScan Check has been renamed to MatrixScan AR, including in the naming of all relevant APIs.
7.2.6
Released: November 10, 2025
Bug Fixes
Core
- Removed unnecessary retention of scanning data in some MatrixScan modes
7.2.5
Released: November 5, 2025
Bug Fixes
Core
- Fixed a memory leak in MatrixScan modes
7.2.4
Released: August 8, 2025
No updates for this framework in this release.
7.2.3
Released: June 24, 2025
No updates for this framework in this release.
7.2.2
Released: May 9, 2025
Bug Fixes
- Fixed an issue in MatrixScan Batch occurring when Aruco marker pairs were detected in the multiscanner. The callback would return only a single marker instead of the result for marker pairs.
7.2.1
Released: April 24, 2025
No updates for this framework in this release.
7.2.0
Released: March 31, 2025
New Features
ID
- ID Capture now supports the decoding of mobile driver’s licenses (currently limited to Australian licenses).
Performance Improvements
Barcode
- We further optimized the resources management in SparkScan, improving battery life when in Target Mode.
Behavioral Changes
- The default
BarcodeBatchBasicOverlaybrush when using theBarcodeBatchBasicOverlayStyle.Framestyle has been changed from white to Scandit blue.
Bug Fixes
Core
- Fixed rare incorrect QR code reads of codes with a low error correction level.
- Fixed a bug in Barcode Selection that caused inconsistent selection times for single barcodes.
7.1.3
Released: March 26, 2025
No updates for this framework in this release.
7.1.2
Released: March 13, 2025
Bug Fixes
- Fixed an issue in SparkScan where the floating button would appear in the center as opposed to bottom-right of the screen.
7.1.1
Released: March 7, 2025
Bug Fixes
- Fixed
sc_recognition_context_releaseto abort potentially still in-progress background set up of the barcode scanner ifsc_barcode_scanner_wait_for_setup_completedwas not called explicitly.
7.1.0
Released: February 21, 2025
New Features
Barcode
- MatrixScan Count now includes the ability to cluster barcodes that belong together. Barcodes can be auto-clustered based on their visual context, or manually grouped by the user by circling them on screen.
- MatrixScan Count now includes the concept of a
Barcode Spacial Grid, bringing the ability to map totes in a grid-like structure. Scanned codes will be returned with their relative location and can be displayed in a map view. This allows for fast and error-free in-store picking using dedicated carts and totes. The following classes have been added:BarcodeSpatialGridBarcodeSpatialGridEditorViewBarcodeSpatialGridEditorViewSettingsBarcodeSpatialGridEditorViewListener
- Introducing the Smart Duplicate Filter: unlike traditional time-based filters, this intelligent solution prevents re-scanning the same barcode unless intended, eliminating delays and improving accuracy. In user testing, it boosted task completion speeds by 10% and reduced unintentional barcode scans by 5% in workflows requiring intentional duplicate scans. Enable this new behavior by setting the existing
codeDuplicateFilterproperty to the special value-2— now the default for both Barcode Capture and SparkScan. See the documentation for details.
ID
- Launched DataConsistency Verification, which identifies suspicious documents by verifying the consistency of data encoded in various parts of the document. This helps detect potential tampering or anomalies.
- Launched a Rejection API to reject documents based on predefined criteria, streamlining validation processes. Examples include rejecting expired documents or those belonging to underage holders.
- Enhanced the scanning capabilities for specific document types. When
ScannerType::FullDocumentis enabled, seamless scanning is now supported even for documents where the Scandit DataCapture SDK offers only Machine Readable Zone (MRZ) scanning. - Added support for scanning the Machine Readable Zone of non-standard Indian passports, where an MRZ line consists of 42 characters instead of 44.
- Added support for scanning the Machine Readable Zone of the Chinese Mainland Travel Permit issued for non-Chinese citizens being residents of Hong Kong or Macau.
- Unified the value of the sex field from VIZ and MRZ results so that it is always one of the values
female,maleorunspecified.
Core
DataCaptureContextcan be used as a singleton throughDataCaptureContext.SharedInstance.- The license key must be set using
DataCaptureContext.Initialize. This step is only required once. Once initialized, the context can be used as before. - It is important to call
DataCaptureContext.RemoveCurrentMode()when the active mode is no longer needed, such as when navigating away from a screen used for scanning. - The following methods have been added (also see Deprecations, below, for removed methods):
setMode: Sets a mode to be the active mode in the context.removeCurrentMode: Removes the currently active mode in the context.static sharedInstance: Returns a singleton instance ofDataCaptureContext. This instance is unusable until properly configured by calling initialize() on it.initialize(string licenseKey): Reinitializes the context by configuring it with a license key.initialize(string licenseKey, string? frameworkName, string? frameworkVersion, string? deviceName, string? externalId, DataCaptureContextSettings settings): Reinitializes the context by configuring it with new settings.
- Calling
DataCaptureContext.AddMode()orDataCaptureContext.setMode()now replaces the current mode with the new one, so it’s no longer needed to remove a mode when adding a new one. - The old non-singleton API is still available.
- The license key must be set using